Compliance

Test Reports
& Certifications

We only publish standards we can back with documentation. Foam is tested by SGS at our own plant in Longjiang, Shunde; certificate copies and test reports are available on request for qualified trade partners and project tenders.

10 verified entries SGS tested foam 6–8 weeks for fresh reports
Verified

What we can document

Each entry below is backed by a document on file. Where a report is dated, that is the issue date of the report we hold.

Quality On request

ISO 9001:2015

Quality Management Systems

Quality management system certified for upholstered furniture design and manufacturing.

Scope
Design and manufacture of upholstered furniture (compressed sofas)

Certificate on file. Number, issuing body and a copy are provided on request for qualified trade enquiries.

Chemical Safety Document on file

Formaldehyde — ISO 14184-2

Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method)

SGS test report: formaldehyde not detected (ND) by ISO 14184-2:2011 — below the 20 mg/kg method detection limit. Certificate holder: Foshan Shunde Longjiang Suifeng Foam Factory — our own foam plant.

Held by
Foshan Shunde Longjiang Suifeng Foam Factory — our own foam plant
Issued by
SGS-CSTC Standards Technical Services Co., Ltd. (Shunde Branch)
Report No.
SDHL250400575401FT
Issued
2025-04-18
Scope
Flexible polyurethane foam

Foam sample tested Apr 2025. Reports are re-issued per order on request.

Fire Safety Document on file

BS 5852

Methods of Test for Assessment of the Ignitability of Upholstered Seating (smouldering and flaming ignition sources)

SGS test report: HR polyurethane foam passes Schedule 1 Part 1 of the UK Furniture and Furnishings (Fire) (Safety) Regulations 1988 (as amended 1989, 1993 and 2010).

Issued by
SGS-CSTC Standards Technical Services Co., Ltd. (Guangzhou)
Report No.
SDHL1701001131FB
Issued
2017-01-23
Scope
Flexible polyurethane foam — tested at our Longjiang, Shunde foam plant

Material test report on file (2017). Test reports are re-issued per order — allow 6–8 weeks.

Fire Safety Document on file

California TB 117-2013

Requirements, Test Procedure and Apparatus for Testing the Smolder Resistance of Materials Used in Upholstered Furniture

SGS test report: foam passes California Technical Bulletin 117-2013 Section 3 (smoulder resistance) for the US upholstered furniture market.

Issued by
SGS-CSTC Standards Technical Services Co., Ltd. (Guangzhou)
Report No.
SDHL1705009866FB
Issued
2017-05-25
Scope
Flexible polyurethane foam — Section 3 smoulder resistance

Material test report on file (2017). Test reports are re-issued per order — allow 6–8 weeks.

Material Safety Document on file

EN 71-3 — Heavy Metals

Safety of Toys — Part 3: Migration of Certain Elements (Category III: scraped-off toy material)

SGS test report: foam passes EN 71-3:2019+A2:2024 — lead, antimony, arsenic, barium, cadmium, chromium (III & VI), mercury and selenium all not detected (ND). Certificate holder: Foshan Shunde Longjiang Suifeng Foam Factory — our own foam plant.

Held by
Foshan Shunde Longjiang Suifeng Foam Factory — our own foam plant
Issued by
SGS-CSTC Standards Technical Services Co., Ltd. (Shunde Branch)
Report No.
SDHL250400575601FT
Issued
2025-04-22
Scope
Flexible polyurethane foam

Foam sample tested Apr 2025. Supersedes the earlier EN 71-3:2013 report from 2017.

Fire Safety On request

BS 7177

Specification for Resistance to Ignition of Upholstered Furniture (ignition sources 0–7)

Finished sofas are assessed against the BS 7177 ignition-resistance specification for the UK market. Foam and fabric components are tested to BS 5852 (see above).

Scope
Finished upholstered furniture — UK ignition-resistance classification

Assessed per configuration. The BS 7177 classification report for a specific model is issued on request — allow 6–8 weeks.

Fire Safety On request

16 CFR 1633

US Standard for the Flammability of Mattresses (open-flame ignition)

Mattress products comply with the US 16 CFR Part 1633 open-flame flammability standard.

Scope
Mattress line — US open-flame flammability compliance

Applies to the mattress line. Test report for a specific model is provided on request.

Third-Party Testing On request

SGS

SGS Testing, Inspection & Certification Services

Third-party testing partner. The SGS test reports listed above (BS 5852, California TB 117-2013, formaldehyde, EN 71-3) are all issued by SGS-CSTC.

Issued by
SGS
Scope
Foam testing, factory inspection and product testing

Testing partner rather than a certificate — see the individual SGS reports above for dated, numbered evidence.

Third-Party Testing On request

TÜV

TÜV Testing & Certification Services

Independent third-party testing partner used for product testing alongside SGS.

Issued by
TÜV
Scope
Independent product testing and certification

Testing partner rather than a certificate. Specific TÜV entity and report numbers are provided on request.

Material Safety Document on file Supplier-held

OEKO-TEX Standard 100

Confidence in Textiles — Product Class I (articles for babies and toddlers), Annex 4

Upholstery fabric certified to OEKO-TEX Standard 100 at Product Class I (baby articles) — the strictest limit class, Annex 4. Certificate held by our fabric mill; supporting test report BD015 274865.2. Certificate holder: PT. Ateja Tritunggal — upholstery fabric mill, Bandung, Indonesia (supplier certificate).

Held by
PT. Ateja Tritunggal — upholstery fabric mill, Bandung, Indonesia (supplier certificate)
Issued by
OEKO-TEX Service GmbH / TESTEX AG (Swiss Textile Testing Institute)
Report No.
BD015 173825
Issued
2026-01-30
Valid until
2026-11-30
Scope
Woven and knitted upholstery fabric — 100% polyester, 100% polypropylene, 100% acrylic (dope dyed) and blends

Supplier certificate — issued to our upholstery fabric mill (PT. Ateja Tritunggal), not to KCK.CASA directly. Valid until 30 Nov 2026.

Full disclosure

What we do not claim

We would rather be precise than impressive. The following are sometimes expected in our category, but we do not currently hold them — so we do not put them on our specification sheets.

  • CertiPUR — Not held. Our foam holds SGS test reports for BS 5852, California TB 117-2013 and EN 71-3 instead.
  • FSC — Not held. Frame material is E1-grade plywood; FSC chain-of-custody is not currently certified.
Tender or project?

Request certificate copies and test reports

Tell us the market and the standard you need to meet. We'll send the documents we hold, or quote for fresh testing if your tender requires a current report.